|
Sensor boards for
Robotics & Automation |
 |
SP03 Text to Speech
Synthesizer
This text
to speech synthesizer comes with a 40mm speaker!
Voltage - 5v only required
Current - 35mA Standby, 60-100mA Speaking.
Control 1 - RS232 interface to PC (38400 baud)
Control 2 - I2C interface for easy wiring to Micro-controller.
Control 3 - 5 pin parallel input port.
Stored Speech - 30 phrases with up to 1925 total characters.
Text to Speech - Unlimited via RS232 or I2C interfaces.
Speaker - 40mm Speaker built in.
Amplifier - 325mW LM386 on-board.
Small Size - 40mm x 40mm excluding connectors. |
 |
CMPS03- Magnetic Compass
Add a compass sense to your robot!
Voltage - 5v only required
Current - 20mA Typ.
Resolution - 0.1 Degree
Accuracy - 3-4 degrees approx. after calibration
Output 1 - Timing Pulse 1mS to 37mS in 0.1mS increments
Output 2 - I2C Interface, 0-255 and 0-3599
SCL speed up to 1MHz
Small Size - 32mm x 35mm
Low Cost - Best Price Compass Module Available |
 |
LCD
2 x 16 / 2 x 20 LCD display module (parallel)
Voltage - 5v only required
Current - 280mA Typ. with backlight
Operating modes : 4 or 8-bit parallel
Backlight
Low cost |
 |
LCD02 - I2C /
Serial 4 x 20 LCD display module
Voltage - 5v only required
Current - 280mA Typ. with backlight
Operating modes : I2C or serial 9600baud
Keyboard : auto scan of a 3 x 4 matrix keyboard (optional)
Low cost |
 |
3x4 Matrix Keypad
For LCD02 LCD module
|
 |
Wireless Camera
Add "eyes" to your robot!
Voltage - 9V (Transmitter) / 12V (Receiver)
Output power : 200mW
System : PAL
Power adaptors provided
Small Size, light weight, high sensibility, low power consumption
Low Cost |
 |
434Mhz Transmitter
/ Receiver module for data transfer |
|
Transmitter :
Voltage - 1.5V to 13V
Current - 6-9mA Typ.
output : 10mW
Range (max.) : 100m
SAW resonator
Low cost |
Receiver :
Voltage - 5v only required
Current - 2.5mA Typ.
Data rate (Max.) :2Kbps
CMOS/TTL compatible output
Low cost |
 |
Micro switch with
10cm lever
|
